The Canadian Guitar Forum banner
1 - 2 of 2 Posts

Premium Member
6,425 Posts
Discussion Starter · #1 · (Edited)
With an upgrade multi-tap (4/8/16 ohm) output transformer.....I want to make use of the 4 and the 8 ohm windings by using 2 separate output jacks. Question: should I use shorting jacks or is it ok for the unused winding to sit open?
I guess that applies to both the 16 ohm winding that I'm not using at all, as well as which ever winding 4/8 I don't have plugged into a speaker at the time the amp is on. Is open ok?

I'm shooting for the dumb question of the day award. I could be over-thinking this.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.