The Canadian Guitar Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
1,064 Posts
Discussion Starter · #1 · (Edited)
Well-here she is-"Myderne" (WORKING NOW!):

All put together, but not wired yet-I have a feeling that will take me a while. As far as playability, so far, so good-nice action, doesn't seem to need too much in the way of a set-up. As usual, my photography skills are somewhat lacking, but I don't have any toes in the picture this time LOL! The guitar, as I mentioned before, is a darker red than it looks in the pics. Can't wait to get the wiring finished up!

Here's a quick question-I was playing around with the height of the pups and I loosened one screw right out of the hole in the base of the pup. Anybody ever tried to get one of these screws reattached while the pup was mounted in the guitar before, or do I have to take off all the strings and remove the ring from the guitar to do it?
-Mikey
 

· Registered
Joined
·
1,064 Posts
Discussion Starter · #9 · (Edited)
Thanx for the thumbs-up! Here's the (temporary) bad news...I melted down the pots when I was wiring the guitar! (GEEZ!). I had my iron and my gun (BADBADBAD!) plugged in and I got a little impatient and used the gun instead of the iron and applied too much heat in my rush to hear what it would sound like. I always used to use the gun in the old days when I was young and foolish with regular success, but I guess my touch isn't as light as it used to be. LOL! Anyways, my $28 StewMac dual-concentric pots don't even turn now, which isn't the end of the world. What IS the end of the world is that nobody in town stocks anything even remotely like what I need, and StewMac takes so darn long to ship (it's a cross-border thing), so I have to wait until I go to Nanaimo next week and hopefully I can get some there. So here's a valuable bit of advice-DON'T EVEN THINK ABOUT USING THAT OLD SOLDERING GUN ON YOUR PRECIOUS PROJECTS (unless it's not plugged in! LOL!). The guitar actually has nice action and unamplified it has a nice, fairly bright resonance to it, so when I get the Duncans up and running, I am expecting great things from this guitar. Can't wait to post an update!
-Mikey
 

· Registered
Joined
·
1,064 Posts
Discussion Starter · #15 ·
IT FINALLY WORKS!!!!!!!!!!!!!!!!!...sort of...a few small problems to fix, like getting the volume to go up instead of down when I turn the knobs clockwise, and getting the blend feature reversed (would like it to go from single to double coil when I turn it clockwise instead of counter-clockwise like it does now). I also seem to have it wired so that turning off the volume on either pickup kills the volume on both in the middle switch position. These to me are just small adjustments, because at least now I know what it sounds like, and it sounds GOOD! The other thing is that I have to contact WD about a mechanical problem with one of the new dual-concentric pots I bought from them-when I turn either the inner or outer knob, the other one turns as well-hope they'll replace it for me (I don't like these ones as much as the StewMac ones I fried the first time). All-in-all though, I am very happy to have it up and making some noise now! YEEHAW!
-Mikey
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top