The Canadian Guitar Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
641 Posts
Well Done Sir. Now get that guitar wired up & plugged in.
You should be able to get it by just loosing off the strings and pulling the ring screws. You only need to get a thin screw driver or table knife under the edge of the pup to lift it up enough to restart the screw.
 

· Registered
Joined
·
641 Posts
It's a shame! Spikezone has made himself a nice guitar. That friends is a hell of an accomplishment. I notice that there have been 29 viewing of his post but only two replies. Take a moment to give him a well done guys. The body shape may not be everyones cup of tea but that's just personal opinion. I think flying V's are Fugly.(so what) Take a moment to notice that he built himself exactly what he wanted and from the pictures he's posted I'd say he's done a damn fine job of it. Just realize that anybody with a few hundred bucks can go out and buy a guitar. Spikezone designed and made his own. Give him some recognition for his achievement.

That is all.

:rockon2: :rockon2: :rockon2:
 

· Registered
Joined
·
641 Posts
Sorry to hear about your pots. Surprised to hear about your Stew Mac order
I've never had them take more than three days to deliver. You know you can go to the hardware store and buy some very small Marr connectors and simply hardwire your pickups to your jack as a temporary solution until you get your pots. You will just need to do all your tone and volume control with the amp.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top