The Canadian Guitar Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
247 Posts
Discussion Starter #1
Has anyone ever used different sized round over bits on their solid body. Lets say 1/4" for the top and 3/8" or 1/2" for the back?
 

·
Registered
Joined
·
1,534 Posts
YEs. But it was because I bound the top and used a 1/8" round over, and then a larger radius on the back for more contouring.

AJC
 

·
Registered
Joined
·
137 Posts
I made a bass once that had a certain round over on all the edges except the edges where your tummy contacted the instrument, I put a much heavier round over and blended it where it met the other. Forgot the numbers, though.
 
1 - 4 of 4 Posts
Top