The Canadian Guitar Forum banner
1 - 1 of 1 Posts

·
All the way to ten
Joined
·
936 Posts
Get a C clamp and use it to clamp the whole assembly together before you solder. Also, take a straight edge and put it across the cover to see if it is flat. If it is you are less likely to need potting. It's the ones that hump up that cause the problem. You can also use a piece of foam or bubble wrap between the coils and the cover.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top