The Canadian Guitar Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
788 Posts
if the frets are tall enough you can have them re-radiused to about 9.5 without touching the fingerboard, actualy do-it yourself fret leveling...buy a 9.5 radius block with 220 grit sandpaper and remove any relief in the neck so that its flat using the truss rod, apply even down strokes from the nut all the way up, make a few extra passes from the 15th fret up for some relief, then re-crown., beats changing necks.
 
1 - 1 of 1 Posts
Top