The Canadian Guitar Forum banner
1 - 1 of 7 Posts

· Registered
1,473 Posts
Hey Mikey,
I always drill the control holes before routing the cavity, as I use the holes to size up the cavity and also you can better judge the thickness remaining/depth you need to go.

I have not sheilded any of my guitars- and dont have an issue with excess noise. However, I do make sure everything is properly grounded. I am placing an order to Stewmac soon and may try some copper foil just to see if it will make a big difference on some of my single coil equipped guitars.

But I dont think its necessary to do the pickup cavities? Or maybe it is.. :) Dont knwo untill you try it I guess!

1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.