The Canadian Guitar Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2,833 Posts
Discussion Starter #1
Well here it is. Finally got it finished. It is definitely not a professional job but an excellent prototype. Let me know what you think.

I did the Bitmo Trio Mod on the head and built the 2x12 closed-back and slanted face cabinet for the hell of it. It is loaded with a Greenback and a 70/80. I also made a new front wood panel for the head so that it matched the cab.

BTW the Bitmo Trio Mod completely transforms this little head into a tone monster. I put aside my OD and Distortion pedals when I play around with this one. Sounds sweet.

http://s172.photobucket.com/albums/w37/stonge007/?action=view&current=P1000432.jpg
 

·
Registered
Joined
·
2,833 Posts
Discussion Starter #5
$25 sheet of birch plywood. $25 worth of vinyl. $32 for the grill cloth (lots left over). I had the extra two speakers sitting around with nothing to do. So a little over $80 minus the speakers. Sounds awesome too. It's a sealed back so there is a fair amount of low end even though it is a vertical 2x12. I wanted a little VJ STACK!! It sounds awesome. I would post audio clips but I truly suck and would lose the little credibility I have...lol!!

:rockon2:
 

·
Premium Member
Joined
·
13,051 Posts
If you have a friend with chops, then have him/her record some clips. I'm partial to a 2x12 vertical myself.
 

·
Registered
Joined
·
2,833 Posts
Discussion Starter #7
If I had a friend with chops I would get him/her to show me how to play!! Unfortunately I only get to play when I have time and none of my friends play so...I'll work on my chops and see if I can get something posted at some point.
 
1 - 8 of 8 Posts
Top