The Canadian Guitar Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
313 Posts
Discussion Starter #1
Guitar or Bass:
7-string
Right or Left Handed: Right Handed
Scale Length: 25.5"

BODY SPECIFICATIONS
Body Shape: EX
Construction: Bolt-on
Material: Alder
Quilted Maple Top: No
Flame Maple Top: No
Binding: No
Binding Color: N/A
Routing: Back
Pickup Configuration: Bridge: Hum Middle: Hum Neck: Hum
Finish: Snow White
Custom Graphic: No

NECK SPECIFICATIONS
Headstock Shape: ESP Pointed
Reverse: No
Tilt: No
Headstock Finish: Black
Neck Finish: Natural Satin
Fingerboard: Maple
Number of Frets: 24
Fret Size: Normal
Inlays: Skull & Crossbones
Custom Inlays: No
ESP Inlay at 12th Fret: Yes
Fingerboard End: Square
Fingerboard Binding: No
Headstock Binding: No
Binding Color: N/A
Nut: Graphite
Nut Width: 1 5/8"
Neck Contour: Thin "U"
Headstock Logo: ESP

PART SPECIFICATIONS
Hardware Color: Black
Bridge System: Original Floyd Rose Locking Tremolo System
Recessed Tremolo: Yes
Pickguard: No
Pickguard Color:
Tuning Machines: Deluxe Gotoh
Input Jack: Side of Body
Pickups: EMG
Pickup Model: Bridge: FH1-B Middle: Neck: FH1-N
Control Pattern: Specify controls/Additional Instructions

Suggested Retail Estimate Including Case:$4,450.00
 

·
Premium Member
Joined
·
2,967 Posts
If you would pay that much for those specs, then I've got some land in Florida with a special price just for you............
 

·
Registered
Joined
·
1,348 Posts
Accept2 said:
If you would pay that much for those specs, then I've got some land in Florida with a special price just for you............
but that includes the case.:sport-smiley-002:
 

·
Registered
Joined
·
698 Posts
The price does sound a little extreme. You could build that guitar using Warmoth parts for about a quarter of the price...if you can live without the ESP inlay at the 12th fret & the logo on the headstock. Heck - you could probably get a luthier to build a custom neck-thru with the same basic specs for about half that...

Some of the specs conflict too. A Floyd with a non-locking nut is a little strange, but not unheard of. The pickup config is H-H-H, but there's no middle pickup specified.

Probably just the way their software is configured. I would expect this is just an estimate created on-line using some tool they have on there?
 

·
Registered
Joined
·
698 Posts
zao_89 said:
I used a form from their site to make the specs.
Yeah - I had a look at it last night. Did a quote for a neck-thru 24-fret Viper with a burst quilt top, all mahagony, EMG's. $4900 USD. Insane... It would be REAL nice though... :D
 
1 - 6 of 6 Posts
Top