The Canadian Guitar Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,290 Posts
The three position power switch is also the polarity switch. If you hear 60 hz hum, try using the other "on" position.

If you get the reverb working, there is a little flaw(read: "feature" in Microsoft lingo) in the design. Turn the volume all the way down and the reverb up full. This will give you a reverb only signal thru the speakers. Useless but something to play with.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top