The Canadian Guitar Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
Hello,A little help is needed here,While cleaning the frets on one of my acustic's,I snaped the nut off.Seems it was glued on.any tip's on what kind of glue I should use to remount it?Do I have to sand down the old glue that is still left where the nut was.Any advise ASAP would help alot as I need this axe tonight.
Thanks
Aaron
 

·
Registered
Joined
·
1,991 Posts
I've used carpenter's glue to install nuts on basses. Should be fine for your acoustic. I would very lightly sand off the old glue, but you want to be careful not to remove any material from the nut itself.
 

·
Registered
Joined
·
1,991 Posts
With well over 4000 posts between here and that other place, I can safely say you are the first person to take any advice from me.

Glad it worked out.

:smile:
 
1 - 4 of 4 Posts
Top