[PaulS]

I am looking for a good quality pot to put in my Epi Sheraton II. The reason I say mini's is because the standard 24mm won't fit in the hole....
I have checked the RS guitarworks kits at there site and they are all the standard 24mm CTS pots. I really don't feel like enlargening the whole... But I'd like to get some good quality pots for the guitar. I have already changed the switch out with a switchcraft it fit no problem. Changed the tuners and looking at a new bridge.. possibly tone pro. Anyway back to the post content if you have any suggestions I'd like to hear. Oh yea pot size is 16mm. Thanks.

 

[PaulS]

May have to come to that, I'll see if they will make a package .. thanks Dave

 

[PaulS]

I asked over at RS and they don't carry anything other than the larger pots. So the search continues.

 

[PaulS]

Geez I was on there site the other night looking at bridges but completely missed them. Thanks for the link Dave these will probably work for me.

 

[PaulS]

They advertise the mini's as 16mm and the reg at 24mm in most the stock list I have looked at. The standard size will not fit through the sound holes for me to get it in. I believe the measurement above are the size of the pots not the mounting holes, 24mm is pretty close to an inch and that would be a big hole... Usually minis require 1/4 inch and reg use 3/8