The Canadian Guitar Forum banner
1 - 1 of 1 Posts

5 Posts
Discussion Starter · #1 ·
Hi! I'm new here and really glad to have found this forum.
I am trying to find a good, appropriate epoxy for coating a freshly de-fretted bass neck.
I used some West System epoxy years ago for a couple of fingerboards but the left over is well over 10 years old now and I'm thinking it might not be any good now.
Also, that stuff is really expensive! And I guess the coating does not have to be an epoxy if there are other suitable coatings. Thanks for any advice.
1 - 1 of 1 Posts