The Canadian Guitar Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi there... so I installed a new Emerson Custom strat harness and it wasn't working on the neck pickup. I rechecked the wiring I did and noticed that I must have broke the connection on 1 of the pots. Can this be repaired??
Thanks ....



Sent from my iPhone using Tapatalk
 

·
Premium Member
Joined
·
26,132 Posts
Not likely, with any sort of reliability.

On the other hand, if it is a Tone pot, you only need two lugs. However, the pot will work differently. In this case, as you rotate clockwise, the resistance will decrease, which means that treble bleed will be max in the position that is usually the brightest.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
Not likely, with any sort of reliability.

On the other hand, if it is a Tone pot, you only need two lugs. However, the pot will work differently. In this case, as you rotate clockwise, the resistance will decrease, which means that treble bleed will be max in the position that is usually the brightest.
Thanks for the input. I'll see if I can just order and replace. It's a blender pot.


Sent from my iPhone using Tapatalk
 
1 - 5 of 5 Posts
Top