[GuitaristZ]

I have an old Jackson JS1 that I want to get back to playing again. It needs a new nut, and I want to get a preslotted one.

The jackson site says the nut is: 1-11/16”

is that all the info I need?

Would this work?
http://www.guitarpartscanada.com/product_info.php?cPath=27_60&products_id=188

or what nuts on this page:
http://www.guitarpartscanada.com/index.php?cPath=27_60

will work with a Jackson JS1

 

[GuitaristZ]

heres the specs for the guitar in case it helps...

http://jacksonguitars.com/products/view_specs.php?full_partno=2900010&name=JS1+Dinky™

 

[fraser]

hi- i cant tell by looking at pics of that model guitar. does the nut sit at the very end of the fretboard, or in a slot just before the end? i made brass nuts for a couple jacksons(not that model) and using the originals as a guideline, they were like a slightly tall fender style nut- sitting in a slot on the fretboard.
the gibson style nut(like in your first link) is a bigger, thicker nut, meant to sit at the end, and not on, the fretboard- the one you linked is correct width so the string spacing is likely good- if your nut sits in a slot you need a fender type, if it sits at the very end, you need a gibson type