The Canadian Guitar Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
18,563 Posts
Discussion Starter #1
Agile Custom AS-2000S Rootbeer Flame Wide w/Case B Stock - RondoMusic.com

If anyone is interested in a 335 style custom guitar, this may be of interest to you. Apparently there are a couple finish cracks so there is about a 50% price cut on this beautiful guitar. The specs are listed below.

  • One of a kind custom order. Guitar shown is the exact one you will receive.
  • This guitar features a true jazz semi hollow body with full body, neck, and headstock binding
  • Solid maple top and solid mahogany back and sides
  • Smaller body (only just over 14" at the widest point) allows for easier handling and excellent balance
  • Cepheus T-6 wide throw tune-O-matic bridge with graphite saddles
  • Die-cast nickel Grover tuners with 18-1 ratio for ultra fine tuning
  • Set-in maple neck with graphite nut
  • Ebony fretboard with 22 jumbo frets (2.7 mm) and dot inlays
  • All nickel hardware with stop bar tail piece - a stop tail bridge provides a greater transfer of the string's vibrational energy to the guitar body; this creates a richer tone and better sustain, and it helps the guitar stay in tune
  • Two ceramic humbucker pickups - humbucker pickups help reduce hum and noise and offer superior performance by giving a thicker fuller sound than single coils; humbuckers also create a much larger magnetic field, which helps eliminate dead spots and increases overall power of the pickup
  • Tailor your personal sound via two volume and two tone controls (speed knobs) and a 3 way pickup selector switch
    Measurements
  • Overall length, including the strap button: 41"
  • Scale length: 24 3/4"
  • Body length: 16 1/2"
  • Width at the widest point: 14 1/8"
  • Body thickness at edge: 1 3/4"
  • Width of the neck at the nut: 1 3/4"
  • Width of the neck at the 12th fret: 2 1/16"
  • Width of the neck at the 22nd fret: 2 1/8"
  • Thickness of neck at the nut: 13/16"
  • Thickness of the neck at the 12th fret: 7/8"
  • String spacing at the nut: 1/4" (1 3/8" overall)
  • String spacing at the bridge: 3/8" (2" overall)
  • Weight: only 8 pounds
 
  • Like
Reactions: Scotty

·
Registered
Joined
·
3,533 Posts
Had a coworker with an Agile LP in this finish...love it.

If I was to spring on anything right now it would be the Epi JDM in the for sale forum but this is a real nice find
 
1 - 2 of 2 Posts
Top