The Canadian Guitar Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
585 Posts
My suggestion is to install independant pots/controls for each pickup so then not only do you get to combine your two most wanted pickups, you get to independantly set them to your liking :). That is of course if you want to drill a few small holes. But the possitives outweigh the negatives on that so long as you do it right.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top