The Canadian Guitar Forum banner

marshall

  1. FS: Friedman PT-20 Wildwood Edition

    Amps, Cabs and Speakers
    Picked this up from another member here, who was the original owner. Amp is in pristine condition, and sounds huge. This is the Wildwood exclusive edition of the PT-20, which was only available from Wildwood Guitars in Colorado for a limited time. It takes the base of the original hand wired...
  2. FS/FT: Marshall JTM 45 Small Box Head Hand Wired Point To Point By Craig Ferguson

    Amps, Cabs and Speakers
    Marshall JTM 45 Small Box Head Hand Wired Point To Point By Craig Ferguson Marshall JTM45 handwired with Master Volume This is a custom build by Craig Ferguson Over 2k US put into this build with a Master Volume on the back. 4/8/16 Speaker selector made with all the best parts Carbon...
  3. Build Thread Ceriatone 2550 Build - Assembly Has Begun

    Amp Building/Technical/Repair
    Hi guys, I have been trying to source a PT for this build (and avoid ordering one from Ceriatone in Malaysia). I had hoped to order one from Hammond but the voltages/amps don't match the Ceriatone spec for this amp which are: Primary 120V (per USA or Canada) Secondary = 350-0-350 200-250mA...
  4. WTB: Celestion G12M Pulsonic 75hz Greenback Pre-rola or rola

    Amps, Cabs and Speakers
    Hey all, Continuing my search for pulsonic greenbacks. Looking for the G12M 75hz variety (although I may be open to a 55hz as well). I'd be interested in the earlier 20watt models, as well as the later 25watt models. Haven't seen too many of these for sale here, but if you have some or have a...
  5. Vineham Broadcaster demos (axe fx 3)

    The Band Lounge (Members Wanted, Performance Vids)
    Short, sweet and to the point. Sorry folks, no solos here today. I've uploaded the mixed tracks and the isolated guitar tracks as per my poll.
  6. FS/FT: Sold please remove

    Guitars
    2004 neck through sunburst model, 24 fret mahogany body flame maple top, Edge Pro. wide flat neck with jumbo frets. Dimarzio Pups with a 3 way switch. Coil Tap. Unreal 10 top would rival lots of PRS guitars. looks like it is on fire..... Set up with 9-46.... A few dings but overall all there...
  7. Marshall Origin 20H Tube replacement

    Amp Building/Technical/Repair
    Hi, I play through a cranked Marshall Origin 20H with a G12 Greenback speaker. I was planning to replace the current EL34s with 6CA7s once they wear out. Is this a feasible option, or would I have to adjust the bias?
  8. Greetings from Scarberia

    For New Users
    Hello Everyone, I am a guitar player with too much antiquated gear and not enuff time to keep all of it in good playable condition. I am searching for anyone that has expertise in repairing/modding the following items: - Marshall 100w amplifier model 1959. Purchased from L&M in 1980, the amp...
  9. Ellman Tone Fox Overdrive - Demo (Fantastic OD pedal made in Canada)

    Electric Guitar
    Hey friends! Just wanted to share with you all this demo video that I made of the Fox Overdrive from Ellman Tone. Ellman Tone is an independent pedal builder out of Markham, he hand-builds some fantastic pedals including the overdrive that I've got here today. Be sure to check him out on...
  10. Telling a story through guitar solos - Resolving and Melody

    Theory and Technique
    Deleted By Thread Creator
  11. Amp pricing (used)

    Music
    as i continue looking for a marshall 2204 i can afford (cant seem to sell my traynor ycs50H though either)...something struck me this morning... You can sift through posts on the marshall form , mylp, and even TGP...and ten years ago, people were giving marshalls away, while Mesa dominated the...
  12. Marshall 2x12 Cab circa JCM800

    Amps and Cabs
    Anybody know the whereabouts of one of these? I am fanatically holding onto my beloved JCM800 Lead Series Combo (model 4104). Killer in every way. Just looking to augment sound projection for larger spaces but cannot bring myself to get the new 1936 available out there. Hoping to find a 2x12...
  13. Blakkstone Hexx Roxx the SPOT Calgary Friday June 16!

    The Band Lounge (Members Wanted, Performance Vids)
    We are back at the SPOT for ROKK! 4408 17 Ave SE, Calgary It will be a non stop rokk and roll party! I'll be brining a couple of Wolfgangs and maybe my new Marshall 2525C! Silver Jubilee 1x12 combo! I got options... could bring my 69 Marshall JMP "Plexi"or my trust and devastating ReVv...
  14. SAD NEWS - John "BUZZY" Burak .. passed away

    Amp Building/Technical/Repair
    Sad news. Well known amp repair tech. John "BUZZY" Burak from Toronto passed away JOHN BURAK's Obituary on Toronto Star
  15. NAD Marshall 2554 Silver Jubilee

    Amps and Cabs
    First acquisition in some time. We decided to take advantage of the insane housing market here a few months back and sold up, made a ton of money and moved into a nice apartment. We love it actually. But I had to give up my "studio" I used to have in the basement. A lot of gear was sold and I...
  16. Where to get a vintage JCM800 repaired in Toronto?

    Amp Building/Technical/Repair
    First place I'm calling is Super Fuzz Audio, but I'd like to hear other suggestions too. We have that tour coming up and I'd like to send it somewhere today or tomorrow. Anywhere else reliable and affordable? Issue: signal cuts out (sounds like it's being converted to 8-bit), usually with lower...
  17. Anyone here have a Marshall Guv'nor Plus?

    Effects Pedals, Strings and more
    Looking to borrow one to try something with at the jamspace, if anyone has one and is willing to lend it out. Probably wouldn't need it more than a week (we jam twice a week). If so, send me a PM! Thanks :)
  18. NAD : 1964 Marshall JTM45 replica! Best one you've ever seen! (pic-heavy) - Updated internal pics!

    Amps and Cabs
    Full disclosure, I'm SO stoked about this I just had post to share this one with my fellow gearheads! This project has been a whole YEAR in the making! Before anybody asks, the builder wishes to remain anonymous as he's a good friend of mine but I can say he lives in North-Carolina. Why did it...
  19. Amp rental

    Amps and Cabs
    ive had a hankering for a 2204...50W JCM800...but dont know anyone that has one to borrow to try out... I know they dont make them...so...does anyone know where, between kingston-ottawa i could rent one for a week...see if its for me? Theres even a clone at spaceman in ottawa...but it runs at...
  20. Need Advice On High End Amps

    Amps and Cabs
    I am looking to invest in a new amp and need advice on what I should go for. Some bands I like: Soundgarden, Alice in Chains, System of a Down, U2, Audioslave etc. I already have the cab I'm going to use (Mesa 1x12, Black Shadow speaker). My budget is around $3000 CAD, used or new. Thanks, JP
Top