The Canadian Guitar Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Guitar Building/Mods/Repair
    Hi guys, Long story short, I attempted to do the finish on my guitar after looking at a few videos and I did a horrible job. It was my first time and I guess I was relying a bit too much on the buffing pads finishing the job of the sanding paper.. And I finished it with wax. You can see the...
  2. Guitar Building/Mods/Repair
    Hi, I'm in the process of learning how to paint a guitar. My first attempt involved nitrocellulose lacquers, I'm quite happy with the result but I wasn't so happy handling rather toxic chemicals (I used a respirator) which made the basement of my building rather smelly for a couple of days...
  3. Guitar Building/Mods/Repair
    I've got a Fender '52 reissue tele with 2 issues: 1) a 7mm x 3mm chip exposing bare wood at the 2nd fret It likely got knocked - it's been stable for a few years: ========================================================= 2) I'll take full responsibility for this second one - seemingly...
  4. Guitar Building/Mods/Repair
    Good Day, I have decided to try my hand at making my own guitar. And, by "making" i actually mean i am going to start with a barebones kit and build off that, so, I understand a better chunk of all the really hard work and science is already done for me and i am not really learning the...
1-4 of 4 Results
Top