The Canadian Guitar Forum banner

buzz

  1. Need Help Fret Level required??? New Buzz...

    Guitar Building/Mods/Repair
    Hey all, So I have a guitar with a Kulson harmonica bridge, neck through made of several laminations, very similar to Jerry Garcia’s Wolf guitar. In December I took it in to have the fret ends filed, and the tech straightened the neck some. Following that there was some new buzzing on the sixth...
  2. Repair Question Stopping pickup buzz on a Tele

    Guitar Building/Mods/Repair
    Good day, I have a wonderful Tele style guitar built by Jeff Neville that needs shielding to reduce EMI buzz. (I've tested cables, switched amps, turned off lights, and concluded that it's definitely the guitar.) I am going to acquire some copper foil tape to line the pickup and control cavities...
  3. Bad Ground issue

    Guitar Building/Mods/Repair
    Hi all, For some reason I have this weird buzzing in my flying v that might be a bad ground. all my solder joints are very nice and its still buzzing. Someone in another forum said it may not be a bad ground. Ive played it through all 3 of my amps and they all buzz. My tele doesn't buzz so its...
  4. bass single coil hum

    Guitar Building/Mods/Repair
    HI I just updated a MIJ Fender jazz bass knock off with a new single coil pickup. There is a lot of hum. I shielded the cavity with aluminum tape and the electronics are grounded with a wire running from under the bridge to the volume pot. The shielding has helped with some of the hum. If i...
Top