ryhon
08-19-2006, 11:03 PM
Ok, I am sorry but I am kind of getting frustrated. I have a Warwick FNA Jazzman 5 which is an absolutely gorgous bass and a Yorkville 200 watt combo amp...2x10. The bass is just so powerful and so many options that I just don't know how to dial in a clear tone thats still thumpin'. I've tried, but I've never really worked with EQ, just playing...and to be quite frank...the bass is overwhelming me. Can you pleaseee offer some EQ settings n my amp and bass to give me a start on a clear not tiny tone? I'll give you some specs on the bass and amp here:
Corvette FNA JazzMan 5 Swamp Ash, Flamed Maple Cap 24 111.5 4 MEC "Large Pole" Passive J MEC Active BEC III-2, 3-way Gold
Type Combo Bass Amplifier
Cabinet Impedance (Ohms) 4
Power @ min. impedance (Watts) 200
Minimum Impedance (Ohms) 2
Burst Power - 2 cycle 250
Speaker Configuration - LF (Size / Power) 2 x 10 inch
Speaker Configuration - HF (Size / Power) Piezo Tweeter
Hum and Noise (dB) -90 dB Unweighted / -94dB Weighted
Input Channels 1
Channel 1 - inputs 1/4 inch phono jack
Channel 1 - controls Volume, Bass, Lo-mid, Hi-mid, Treble, Contour
Channel 1 - switches Limiter, DI out pre/post EQ
Input Sensitivity (mV) 25
Line Out (type / configuration) XLR pre or post EQ
Line Out Sensitivity (Vrms) 1.0
Effects Loop / Location Yes / Front
LED Indicators Power
Protection Thermal / Short Circuit
Limiter / Switchable Yes
External speaker output / location Yes / Rear
Headphone Jack Yes
Other Features XC115X Single 15 inch Extension cabinet is ideal mate for XC200 / XC200T
Dimensions (DWH, inches) 14 x 22 x 23.5
Dimensions (DWH, cm) 36 x 56 x 60
Weight (lbs / kg) 64.8 / 29.4
Any and all help is greatly appreciated from strings, to EQ to well quite frankly anything! thanks...btw the stock Warwick strings are still on the bass...
Corvette FNA JazzMan 5 Swamp Ash, Flamed Maple Cap 24 111.5 4 MEC "Large Pole" Passive J MEC Active BEC III-2, 3-way Gold
Type Combo Bass Amplifier
Cabinet Impedance (Ohms) 4
Power @ min. impedance (Watts) 200
Minimum Impedance (Ohms) 2
Burst Power - 2 cycle 250
Speaker Configuration - LF (Size / Power) 2 x 10 inch
Speaker Configuration - HF (Size / Power) Piezo Tweeter
Hum and Noise (dB) -90 dB Unweighted / -94dB Weighted
Input Channels 1
Channel 1 - inputs 1/4 inch phono jack
Channel 1 - controls Volume, Bass, Lo-mid, Hi-mid, Treble, Contour
Channel 1 - switches Limiter, DI out pre/post EQ
Input Sensitivity (mV) 25
Line Out (type / configuration) XLR pre or post EQ
Line Out Sensitivity (Vrms) 1.0
Effects Loop / Location Yes / Front
LED Indicators Power
Protection Thermal / Short Circuit
Limiter / Switchable Yes
External speaker output / location Yes / Rear
Headphone Jack Yes
Other Features XC115X Single 15 inch Extension cabinet is ideal mate for XC200 / XC200T
Dimensions (DWH, inches) 14 x 22 x 23.5
Dimensions (DWH, cm) 36 x 56 x 60
Weight (lbs / kg) 64.8 / 29.4
Any and all help is greatly appreciated from strings, to EQ to well quite frankly anything! thanks...btw the stock Warwick strings are still on the bass...